Complete NDT Services
Industrial testing for defect detection, material verification and asset integrity.
Jagdamba Technology supports fabrication, maintenance and QA teams with on-site NDT inspection services across Pune and Maharashtra — certified technicians, calibrated equipment, code-referenced reports.
Choose by Objective
What are you trying to find or verify?
Not sure which NDT method you need? Start here — select your inspection objective and we'll recommend the right approach.
Surface Defect Detection
Find cracks, porosity, laps and surface-breaking discontinuities on welds, castings, forgings and machined components. Suitable for all metallic materials.
Internal / Volumetric Defect Detection
Detect sub-surface flaws, lack of fusion, inclusions and internal cracks in welds, pressure vessels, pipes, plates and castings without cutting or sectioning.
Material Verification & Properties
Confirm alloy grade, detect material mix-ups, verify hardness of welds and heat-affected zones, and check thickness loss due to corrosion or erosion.
Service Menu
All NDT methods we offer
Every service is performed per applicable IS / ASME / AWS / API codes using calibrated equipment and ASNT-certified personnel.
Ultrasonic Testing
High-frequency sound waves used to detect internal flaws, measure wall thickness and check for corrosion loss in welds, plates, pressure vessels and piping.
View UT service pageMagnetic Particle Testing
Detects surface and near-surface cracks in ferromagnetic materials using magnetic fields and iron particles. Fast and reliable for weld and forging inspection.
View MPT service pageDye Penetrant Testing
Coloured or fluorescent dye applied to surface to reveal open cracks and porosity. Works on all non-porous materials including stainless steel and aluminium.
View DPT service pageRadiographic Testing
X-ray or gamma-ray imaging of weld cross-sections to detect volumetric defects, inclusions and lack of fusion in critical pressure-retaining components.
View RT service pagePositive Material Identification
XRF analyser confirms alloy grade and chemical composition on-site. Critical for stainless steel, duplex, Cr-Mo and other high-value or safety-critical materials.
View PMI service pageHardness Testing
Portable Brinell, Rockwell and Vickers hardness testing on base metal, welds and heat-affected zones. Used for post-weld heat treatment verification and incoming QC.
View HT service pageVisual Testing
Systematic weld appearance, dimensional and surface condition assessment per AWS, ASME and IS acceptance criteria with sketch-based documentation of findings.
View VT service pageCustom Inspection Scope
Need multiple methods combined, a survey-based campaign or a bespoke inspection plan? We build custom NDT programs to your project specification and code requirements.
Discuss your requirementMethod Comparison
Quick method selection guide
Use this to narrow down the right NDT method for your component and defect type. Our team is available to confirm the best approach for your specific requirement.
| Method | Detects | Best For | Material | Output |
|---|---|---|---|---|
| UT | Internal flaws, thickness loss, laminations | Welds, plates, pressure vessels, piping | All metals | Technical Report |
| MPT | Surface & near-surface cracks | Ferromagnetic welds, forgings, castings | Ferromagnetic only | Indication Report |
| DPT | Open surface-breaking defects | SS, aluminium, machined parts, non-magnetic | All non-porous | Visual Report |
| RT | Volumetric internal defects, inclusions | Critical welds, castings, pressure parts | All metals | Radiograph + Report |
| PMI | Alloy grade, mix-ups, composition | Incoming material, site piping, stainless & alloy | Metals | Material ID Result |
| HT | Surface hardness, HAZ condition | Post-weld, PWHT verification, incoming QC | Metals | Hardness Report |
| VT | Weld profile, surface condition, corrosion | Pre-inspection screening, weld appearance QC | All materials | Inspection Record |
Codes & Standards
We work to your specification
Procedures are written and qualified to the standard specified by your project, client or regulatory requirement.
Article 4 — UT, Article 6 — RT, Article 7 — MPT, Article 24 — DPT
Structural Welding Code — Steel: UT & VT acceptance
Indian Standard for UT of Fusion Welded Joints
Indian Standard for MPT of Welds
Indian Standard for RT of Fusion Welded Butt Joints
In-service Piping Inspection — thickness & corrosion assessment
Welded Tanks for Oil Storage — weld & floor inspection
UT of Fusion-Welded Joints in Metallic Materials
Our Process
Enquiry to report — how we work
A simple, consistent process for every inspection job — regardless of method or scale.
Enquiry & Scope Review
Share your component, location and applicable code. We confirm the right method, access requirements and mobilisation timeline.
Procedure & Mobilisation
Written inspection procedure prepared. Calibrated equipment and certified personnel mobilised to your site within 24–48 hours.
Inspection & Evaluation
Inspection carried out per the approved procedure. All indications recorded with location, depth and severity before applying acceptance criteria.
Report & Sign-off
Formal inspection report issued and signed by a Level II technician. Delivered same-day or next-day with all calibration and scan records.
Ready to schedule your NDT inspection?
Call, WhatsApp or submit a quote — we respond within 4 business hours.